DECORLUX<\/b><\/p>\n
Product Description<\/b><\/p>\n
Decorlux is a ready-mixed marble finish for interior use.\u00a0 <\/span>It is a pure mineral product.\u00a0 <\/span>The main component is conditioned lime putty manufactured from selected raw materials.<\/p>\n Coverage<\/b><\/p>\n 0,3 to 1 kg\/m\u00b2, depending on the base<\/p>\n Colour<\/b><\/p>\n The product is supplied in natural white and in 20 ready-mixed shades.\u00a0 <\/span>The Coridecor oxide colour concentrates can be used to produce any colour you want.<\/p>\n Use<\/b><\/p>\n Preparation<\/p>\n Corifondo should be applied as a base coat before using Decorlux on synthetic and gypsum backgrounds.\u00a0 <\/span>This primer is a base coat material for the Coridecor stucco products.\u00a0 <\/span>The primer provides a base, which will absorb Decorlux evenly and give a good bond.\u00a0 <\/span>Vapour permeability is also maintained.\u00a0 <\/span>Corifondo can be diluted with water (20 to 50%), depending on the absorption capacity of the base.\u00a0 <\/span>Corifondo can also be coloured with the oxide colour concentrates so that the first colour can be applied as early as the base coat.<\/p>\n Types of base<\/p>\n Gypsum, lime, lime-cement and cement plasters<\/p>\n First remove dust parts from the plasterwork, next cover with primer or thin plaster and then apply Corifondo as the base coat.<\/p>\n Concrete<\/p>\n Concrete should be pre-treated with a suitable primer before applying Corifondo as the base coat.<\/p>\n Gypsum plasterboard, chipboard<\/p>\n Gypsum plasterboard and chipboard must be rendered flat and smooth with a suitable primer or plaster, before applying Corifondo as the base coat.<\/p>\n The base must be absolutely dry and form a stable background before the base coat is applied.\u00a0 <\/span>Loose or peeling paint, lime paint and distemper should be removed. Allow the Corifondo to dry thoroughly (12 hours) before starting to apply Decorlux.<\/p>\n How to use Decorlux<\/p>\n Apply Decorlux with the flexible 80 x 200 trowel from the stainless steel 120 x 280 trowel.\u00a0 <\/span>Apply in small quantities (to cover), at least three times.<\/p>\n Once the surface is perfect, you can start polishing.\u00a0 <\/span>Again the right tool is particularly important.\u00a0 <\/span>Clean the flexible trowel with 300 grit sandpaper.\u00a0 <\/span>It is recommended that you do not apply a final coat of wax to Decorlux surfaces.\u00a0 <\/span>The surface will shine without wax and can always be patched.\u00a0 <\/span>Coridecor Plastelux can be used where washable surfaces are required (restaurants, hotels, public buildings and high-moisture rooms).<\/p>\n Packaging<\/b><\/p>\n 25 kg and 5 kg plastic buckets.<\/p>\n